<<Explanation of the typical model name>>
	ATCII series		HOME >> ATCII series

		ATCII - 300S/D Mold clamping force 200 - 350ton No. of servo axes 1 axis (traverse) Kick frame Single support type Vertical arm 2-stage telescopic type Linear guide Yushin linear rail Traverse frame Lightweight reinforced aluminum frame Controller GII-type controller Click on the above mark displays an explanatory page.

Traverse axis air-driven take-out robots with excellent price performance Take-out robot emphasizing price performance with only servo motor driving the traverse axis while air cylinder driving vertical and kick axes

Suitable for low-ceiling plants Reduced robot height by adopting 2-stage telescopic vertical arm. Suitable for the use at low ceiling plants.

Power voltage AC200V (50/60Hz) Driving method Digital servo motor (1 axis) Air cylinder Control method Micro computer control Air pressure 0.49MPa Maximum air pressure 0.79MPa Wrist flip angle 90 degrees

Model ATCII-300S ATCII-300D Maximum Power Consumption Single-phase AC200V 3A Traverse stroke (mm) 1500 <1700> <<1900>> Vertical stroke (mm) Main Arm 1050 Sub Arm - 1100 Kick stroke (mm) Main Arm 250 Sub Arm - 150 Air consumption liter (Normal) / cycle 52 83 Maximum payload (kg) 3kg.*

<    >Type L, <<    >>Type LL * More than the above maximum load carrying capacity is possible by changing the settings for the take-out robot.

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.