DISPOLE		HOME >> DISPOLE

		DISPOLE STEP1 Transfer unit STEP2 Cooling stage STEP3 Ionizer STEP4 Pick & Place unit STEP5 Placement of disc separater STEP6 Stock stage

Compact High performance This system provides disc cooling just after molding, antistatic treatment and stacking to a stacking spindle. Disc spacer loading Spacers are placed between discs to prevent 2 discs from sticking together and promote heat radiation.

Cycle time The system can perform at 3.5-seconds-per-cycle.

Power voltage AC200V (50/60Hz) Power consumption 10A at AC200V Air consumption 150 liter (Normal) /min Max (3 vacuum circuits) Cycle time 3.5sec. minimum. Cooling station 12 positions No.of stacking spindle 6 Clean room rating Class100 Net weight 400Kg

Drive part Drive source Drive stroke Transfer unit rotation Pneumatic cylinder approximately 180 degrees rotation Cooling stage rotation DD motor 12 division Pick & Place unit swing up/down Pneumatic cylinder Pneumatic cylinder 90 deg. swing approximately 20mm stroke. Stack stage rotation Induction Motor 6 division Spacer stage rotation Induction Motor 6 division Stack stage side lifter up/down Induction Motor approximately 270mm stroke. Spacer stage side lifter up/down Induction Motor approximately 270mm stroke.

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.