| Option |
Explanation of option |
| X Specification |
When molded products are released onto a conveyor or a chute, the chuck unit rotates 90 degrees
to release the products without damaging them. |
| XC Specification |
With vacuum suction, the model can take out molded products that cannot be gripped with
chuck or that are molded with multi-cavity mold. When the products are released, an end-of-arm
tool rotates 90 degrees. (The vacuum suction circuit is included.) |
| XN Specification |
Sprues of a side-gate or direct-gate mold can be cut by nipper chuck. In releasing the products,
90 degree wrist flip is also applicable. (Applicable for 450, 550, 650) |
| Conveyor interlock |
By attaching the optional metal connector, it interlocks with flat belt conveyor and becomes capable
of stocking molded products by shot. |
| Reject circuit |
When a molding machine gives reject signal, the defective product is released at a different position
from that for good products. |
| Special color |
The main body, frame covers, control box, etc. can be painted with the color specified by customers.
(Not applicable for plastic cover) |
| Ejector interlock |
The ejector goes forward after the robot moves to the take-out position. This is useful when the
timing of ejector motion and robot take-out motion are to be synchronized. |
| Air blow circuit |
When a runner is gripped and the arm ascends, fragments of the molded products that are adhering
to the mold are blown away by using air. |
| Nipper half-grip circuit |
A pressure-reducing valve is added to the nipper circuit in order to secure the products when
extracting them from the mold. |
| Vacuum blow off valve |
When it is difficult to release products that stick to the vacuum suction pads, the robot can release
the products by replacing the vacuum with pressurized air. |
| Swing limit waiting |
When the robot arm cannot stay at the normal waiting position while molds closed, it can stay
at the swing limit position. |
| Safety door closed signal |
This signal is input to the robot when the safety door of a molding machine is closed. Robot
will not start without this signal under auto operation. |
| Auto injection signal |
Take-out robot does not start its operation without auto injection signal of a molding machine.
With this function, the take-out robot starts its operation only when real molding is done. |
| Multilingual display |
Displayed language on the controller can be changed by selecting from multilingual choices. (Up
to two languages out of Japanese, English, Chinese, Korean, German, Dutch, Slovak, Czsech, Polish, Indonesian) * Up to two languages out of Japanese, English and German for CE specification.
|
| Lead Through Teaching |
With this software, operators can easily add or change motion sequence by arranging input signals,
output signals and timer without the assistance of programmers. |
Three positions safety switch
on controller |
Valve operation is possible only while the operator is holding this switch in the center position. |
| High speed specifications |
High speed operation is possible. (Applicable for 450, 450X, 550, 550X) |
