<<Explanation of the typical model name>>

N-HOP-G series
HOME >> N-HOP-G series

OutlineDimensionsOption List
N - HOP-G 450, N - HOP-G 550, N - HOP-G 650,
N - HOP-G 750, N - HOP-G 900

Mold clamping force Mold clamping force 30 - 350ton
No. of servo axes No. of servo axes 1axis (kick)
Swing angle Swing angle 50- 90
Adjustable stroke Adjustable stroke
Adjustable chuck waiting position Adjustable chuck waiting position
Linear guide Linear guide Yushin linear rail
Controller Controller G-type controller
Click on the above mark displays an explanatory page.		 N-HOP-G 550X - A servo motor is used on the kick axis.


A servo motor is used on the kick axis.
An NC control servo motor drive makes it possible to adjust the kick stroke with the controller rather than the conventional method of manual adjustment on the robot.


Power voltage AC200V 3.0A (50/60Hz)
Control method Sequence stored program
Working Pressure 0.4 - 0.5MPa
Maximum allowable pressure 0.8MPa

Model N-HOP-G
450		 N-HOP-G
550		 N-HOP-G
650		 N-HOP-G
750		 N-HOP-G
900
Stroke
 Descent (mm) 450 550 650 750 900
Kick (mm) 350 620
Swing Min.50 - Max.90
Chuck position Waiting position adjustable range 60mm
Air consumption
liter(Normal)/cycle 		11 13 15 17 19
Maximum weigh capacity 2Kg
Robot weight 28kg 29kg 30kg 32kg 33kg

Up
Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.