<<Explanation of the typical model name>>
	TWINHOP-G series	HOME >> TWINHOP-G series

		TWINHOP - G 450, TWINHOP - G 550 Mold clamping force 30 - 100ton Swing angle 50- 90 Adjustable stroke Adjustable chuck waiting position Linear guide Yushin linear rail Controller G-type controller Click on the above mark displays an explanatory page.

Three-plate molds are supported Two arms are provided for both the product and the runner sides, allowing small products and runners to be taken out simultaneously. Multilingual display selection (optional). This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented the international market.

A vacuum unit can be installed. A compact vacuum end of arm tool can be installed on the main arm.

Power voltage AC200V 0.25A (50/60Hz) Control method Sequence stored program Working Pressure 0.4 - 0.5MPa Maximum allowable pressure 0.8MPa

Model TWINHOP-G450 TWINHOP-G550 Stroke Descent (mm) 450 550 Kick (mm) 90 Swing Min.50 - Max.90 Chuck position Waiting position adjustable range 60mm Air consumption liter(Normal)/cycle 16 18 Maximum weigh capacity 2Kg Robot weight 47kg 48kg

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.