<<Explanation of the typical model name>>
	V-HOP series		HOME >> V-HOP series

		V - HOP 350, V - HOP 450, V - HOP 550, V - HOP 650, V - HOP 750 Mold clamping force 20 -150ton Swing angle 60- 90 Adjustable stroke Adjustable chuck waiting position Linear guide Yushin linear rail Controller G-type controller Click on the above mark displays an explanatory page.

Runner take-out robots for vertical clamp molding machines These are very effective when taking out runners from vertical clamp molding machines Swing function The angle of rotation can be adjusted between 60 and 90 degrees, allowing runners to be released at any location.

Applicable to product take-out from either the lower or upper mold. Products can be taken-out from either the lower or upper mold half simply by changing settings. Multilingual display selection (optional). This comes standard with a G-type controller,which is available with an optional multilingual displays election function oriented the international market.

Power voltage AC200V 0.25A (50/60Hz) Control method Sequence stored program Working Pressure 0.4 - 0.5MPa Maximum allowable pressure 0.8MPa

Model V-HOP350 V-HOP450 V-HOP550 V-HOP650 V-HOP750 Stroke Entry (mm) 350 450 550 650 750 Descent (mm) 90 Swing Min.60 - Max.90 Transverse standby position adjustment (mm) Waiting position adjustable range 60mm Air consumption liter(Normal)/cycle No reversal 8 10 12 14 16 Reversal possible 12 14 16 18 20 Maximum weigh capacity 1.5Kg Robot weight 37kg 38kg 39kg 42kg 43kg

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.