High Speed type full-servo take-out robots

			<<Explanation of the typical model name>>
	RAⅡ-α-HS series		HOME >> RAⅡ-α-HS series

RAⅡ-α- 150 S/D - HS



	Clamping force	100～220 ton

	Number of servo axis	3/5-axis

	Kick frame	Dual support type

	Vertical frame	2-stage telescopic type

	Guide section	Yushin linear rail



	NC box	On robot body

	Controller	E-touch Web

	Take-out time*	RAII-α-250S-HS Take-out cycle: 0.46seconds* Total cycle: 2.83seconds*



*Under our specified measurement conditions for the dry cycle.

Click on the above mark displays an explanatory page.

The robot is equipped with a flexible yet user-friendly E-touch Web controller and includes Lead Through Teaching software and networked operation.

●High-speed operation realizes high production efficiency.
	Adoption of servo motor on every axis, kick axis, traverse axis and vertical axis makes high-speed operation possible that leads to high production efficiency.

●The steel robot traverse beam provides superior rigidity
	To meet customers demands for high accuracy and low vibration when performing value-added operations.

●For networked operation
	The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and Y-MAPII are required to establish systems for controlling and monitoring actual production.)

●Latest controller
	The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.

Model		RAⅡ-α -150S-HS	RAⅡ-α -150D-HS
Maximum Power Consumption		Triple phase 　AC200V 16.4A	Triple phase 　AC200V 22.8A
Traverse Stroke （mm）	Standard	1500
	L	1700

Vertical Stroke （mm）	Main arm	850
	Sub arm	―――	850
Kick Stroke （mm）	Main arm	550	414.5
	Sub arm	―――	414.5
Air consumption （Normal）/cycle		4		4
Maximum payload (kg)		Less than 3Kg※

※The payload varies depending on the take-out robot speed setting.