NETLINER <<Explanation of the typical model name>> 　

RAⅡ-α-HS series
HOME >> RAⅡ-α-HS series		 　

概要寸法オプション
RAⅡ-α- 250 S/D/DS - HS
型締力 Clamping force 180～300 ton
サーボ軸数 Number of servo axis 3/5-axis
引抜フレーム Kick frame Dual support type
昇降アーム Vertical frame 2-stage
telescopic type
ガイド部 Guide section Yushin linear rail
制御ボックス NC box On robot body
コントローラ Controller E-touch Web
Take-out time* RA-α-250S-HS
Take-out cycle: 0.55seconds*
Total cycle: 3.51seconds*
*Under our specified measurement conditions for the dry cycle.
Click on the above mark displays an explanatory page.

　
The robot is equipped with a flexible yet user-friendly E-touch Web controller and includes Lead Through Teaching software and networked operation.
　
●S-type, D-type and DS-type are available
　 S-type: 2 plates mold capability/equipped with product arm only
D-type: 3 plates mold capability/equipped with both product arm and runner arm
DS-type: 3 plates mold capability/equipped with product arm and runner arm both for product extraction
　
●The steel robot traverse beam provides superior rigidity
　 To meet customers demands for high accuracy and low vibration when performing value-added operations.
　
●For networked operation
　 The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and Y-MAPII are required to establish systems for controlling and monitoring actual production.)
　
●Latest controller
　 The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.
　
　
　



Power source AC200V（50/60Hz）
Driving method Digital servo motor (3/5 axes)
Control method Micro computer control
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

Model RAⅡ-α
-250S-HS 		RAⅡ-α
-250D-HS 		RAⅡ-α
-250DS-HS
Maximum Power Consumption Triple phase 　AC200V 17.4A Triple phase 　AC200V 26.2A
Traverse Stroke
（mm）		 Standard 1500
L 1700
Vertical Stroke
（mm） 		Main arm 950
Sub arm

―――

 950
Kick Stroke
（mm）		 Main arm 760 570 720
Sub arm ――― 570 720
Air consumption
（Normal）/cycle 		4.8 9.6
Maximum payload (kg) Less than 5Kg※
　
※The payload varies depending on the take-out robot speed setting.

上へ
Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.