SIDE ENTRY <<Explanation of the typical model name>>

SVR-B50
HOME >> SVR-B50

OutlineDimensionsOption List
SVR-B50
Mold clamping force Mold clamping force For product extraction:-150 ton
For insert
system: -50 ton
No. of servo axes 2-axis
コントΝーラ Guide section Yushin linear rail
Full cycle time* 1.53sec

*Based on dry-cycle measurement conditions as specified by Yushin.
Click on the above mark displays an explanatory page.
SXA-800 III Side-entry type


Adoption of special double-speed mechanism on traverse axis
  Special double-speed mechanism with two-stage slide is adopted on the extraction arm. This adoption removes the projection of the arm. That makes the robot compact to realize saving space.
   
High rigidity
  This robot including its arm is designed to be highly rigid for insert molding which requires high precision.
   
High-speed operation
  This robot realizes 1.53 second full dry-cycle time composed of work-insert time and product -extraction time.
   
   
Adoption of the color liquid-crystal touch display controller
  This robot is equipped with high-functional controller as standard, which has both touch panel and function key.
E-touch Web controller

Adoption of the thin-type arm

  This robot's arm can enter even narrow mold opening space.
Applicable for high-speed runner extraction
 

This robot can be also used for high-speed runner extraction out of the vertical molding machine because of its high-speed operation.



Power voltage AC200V (50/60Hz)
Driving method Digital servo motor (2-axis)
Control method Micro computer
Air Pressure 0.49MPa
Maximum air pressure 0.79MPa

Model SVR-B50
Maximum Power Consumption single phase AC200V 6.9A
Traverse Stroke
(mm)

700(450 : for runner extraction)
Kick Stroke
(mm)		 200
Air consumption
liter(Normal) / cycle		 8.0(Double Product vacuum circuit)
Maximum payload (Including end-of-arm tool) Less than 5 kg
*1 : The payload varies with the robot speed setting.

Up
Copyright (C) , 2004. Yushin Precision Equipment Co.,Ltd. All rights reserved.