<<Explanation of the typical model name>>
	SX-21 series		HOME >> SX-21 series

		SX-21-150/250, SX-21-150/250-D, SX-21-150/250-HS Mold clamping force 100 - 300ton No. of servo axes 2 axes Linear guide Yushin linear rail Take-out time* 0.320sec *Champion data achieved in actual molding (Take-out of 8-cavity food containers) Click on the above mark displays an explanatory page.

Side-entry type A side entry robot is used to extract parts using the shortest possible stroke with the robot in standby mode at the side of the molding machine. Because there is no mechanisms above the mold, this method can be used in applications where dust causes problems, such as in clean rooms. The take-out robot can also be installed in plants where there is low overhead clearance.

Color liquid crystal display touch panel on controller The various functions are displayed using icons for improved readability. The controller is a lightweight hand-held type designed for easy, convenient use.

Power voltage AC200V (50/60Hz) Driving method Digital servo motor (2 axes) Control method Micro computer Working pressure 5kgf/cm2 (72.5PSI) Maximum allowable pressure 8kgf/cm2 (116PSI)

Model SX-21-150/250 SX-21-150/250-D SX-21-150/250-HS Maximum Power Consumption 3-phase AC200V 7.9A Traverse Stroke (mm) 1500 *2 Kick Stroke (mm) 400 *2 Air consumption liter(Normal) / cycle 5 18 5 Maximum weigh capacity kg (lbs.) 2Kg Max. *1 Weight (kg) 300kg

*1 : It is possible to increase the maximum weight capacity depending on the speed acceleration and deceleration data. *2 : 150 model has the same stroke as 250 model.

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.