Servo-Driven Robot for Injection Molding Machine

			<<Explanation of the typical model name>>
	RA series		HOME >> RA series

RA - 30 S/D



	Clamping force	Less than 60ton

	Number of servo axes	3 / 5 -axis

	Kick frame	Single support type

	Vertical frame	1-stage non-telescopic type

	Guide section	Yushin linear rail

	Traverse frame	Lightweight reinforced aluminum frame



	Controller	E-touch Web

Click on the above mark displays an explanatory page.

	This model is well suited to extraction of micro molding and precise molded parts such as gears and connectors.The robot is equipped with a flexible yet user-friendly E-touch Web controller and includes Lead Through Teaching software and networked operation.

	Sealed cable carriers reduces dust contamination from moving cables and wires.

	For networked operation.
	The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and Y-MAPII are required to establish systems for controlling and monitoring actual production.)

	Latest controller.
	The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.

	Power source	AC200V (50/60Hz)
	Driving method	Digital servo motor (3 / 5 axis)
	Control method	Micro computer controller
	Air pressure	0.49MPa
	Maximum air pressure	0.79MPa
	Wrist flip angle	90 deg.

Model		RA-30S	RA-30D
Maximum Power Consumption		Single phase AC200V 8.8A (D type is 10.0A)
Traverse Stroke (mm)	Standard	900
	L	(1200)
	LL	<1600>
Vertical Stroke (mm)	Main Arm	450
	Sub Arm	-	550
Kick Stroke (mm)	Main Arm	320<470>	280<430>
	Sub Arm	-	280<430>
Air consumption liter(Normal) / cycle		3
Maximum payload (kg)		Less than 2kg*

*It is possible to increase the maximum weight capacity depending on the speed acceleration and deceleration data.
( )Type L. < >Type LL

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.