NETLINER <<Explanation of the typical model name>>


HOME >> RA-a series



OutlineDimensionsOption List



Mold clamping force Clamping force 30 - 80 ton
No. of servo axes Number of servo axis 3 / 5-axis
Kick frame Kick frame Single support type
Descend axis arm Vertical frame 1-stage non-telescopic type
Linear guide Guide section Yushin linear rail
Control box NC box On robot body
Controller Controller E-touch Web
Click on the above mark displays an explanatory page.


  The robot is equipped with a flexible yet user-friendly E-touch Web controller and includes Lead Through Teaching software and networked operation.
 
Sealed cable carriers reduces dust contamination from moving cables and wires.
 
The steel robot traverse beam provides superior rigidity
  To meet customers demands for high accuracy and low vibration when performing value-added operations.
   
For networked operation.
  The network communication port required for production intensive control and monitoring is provided as standard.(System software packages such as Mold Mate and Y-MAPII are required to establish systems for controlling and monitoring actual production.)
 
Latest controller.
  The latest E-touch Web controller is provided as standard, achieving flexible and expandable operation using Windows as its operation system.

 



Power source

AC200V (50/60Hz)
Driving method Digital servo motor (3 / 5 axis)
Control method Micro computer control
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

Model RA-a-70S RA-a-70D
Maximum Power Consumption Single phase AC200V 6.8A (D type is 8A)
Traverse Stroke
(mm)
Standard -
L (1400)
LL <1700>
Vertical Stroke
(mm)
Main Arm 600
Sub Arm - 650
Kick Stroke
(mm)
Main Arm 500 450
Sub Arm - 450
Air consumption
liter(Normal) / cycle
2.6
Maximum payload (kg) Less than 3kg*
*The payload varies depending on the take-out robot speed setting.
( )Type L. < >Type LL


Up
Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.