<<Explanation of the typical model name>>
	VNRII series		HOME >> VNRII series

		VNRII - 1300 S clamping force 1000 - 1600ton Number of servo axis 4 axis Kick frame Specially designed for low ceiling Descend axis arm Specially designed for low ceiling Linear guide Yushin linear rail NC box On robot body Controller E-touch 11(ver, 5.0) Click on the above mark displays an explanatory page.

Specially designed for low ceiling The machine height is minimized while maintaining the required descent stroke with a special mechanism for the descent axis (where the taken-out product ascends into the kick frame).

NC servo drive to control the flip angle The flip angle of the EOAT is controlled with a NC servo motor. This is effective for flexible positioning and taking out heavy products.

Power source AC200V (50/60Hz) Driving method Digital servo moter (4 axis) Control method Micro computer control Air pressure 0.49MPa Maximum air pressure 0.79MPa Wrist Flip angle 182 degrees (NC Flipping axis)

Model VNRII-1300S Maximum Power Consumption 3 phase AC200V 9.7A Traverse Stroke (mm) Standard 3000 L (3500) Descent Stroke (mm) Main Arm 1800 Sub Arm - Kick Stroke (mm) Main Arm 1410 Sub Arm - Air consumption liter(Normal) / cycle 45 Maximum weigh capacity kg (lbs.) 30Kg*

* More than the above maximum load carrying capacity is possible by changing the settings for the take-out robot. ( )Type.L

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.