<<Explanation of the typical model name>>
	YAII series		HOME >> Model list >> YAII series

		YAII-1300S/D Clamping force 1000 - 1600 ton Number of servo axis 3 / 5 axis Kick frame Dual support type Vertical frame 2-stage telescopic type Guide section Yushin linear rail NC box On robot body Controller E-touch compact Click on the above mark displays an explanatory page.

	The robot is equipped with a user-friendly E-touch compact controller providing excellent price and performance value.
		Sealed cable carriers reduces dust contamination from moving cables and wires.
		The steel robot traverse beam provides superior rigidity To meet customers demands for high accuracy and low vibration when performing value-added operations.
		2-stage telescopic vertical arm and a cable carrier that does not protrude above the main arm assembly saves overhead clearance for installations in low ceiling plants.

Power source AC200V (50/60Hz) Driving method Digital servo motor (3 / 5 axis) Control method Micro computer control Air pressure 0.49MPa Maximum air pressure 0.79MPa Wrist flip angle 90 deg.

Model YAII-1300S YAII-1300D Maximum Power Consumption Triple phase AC200V 9.1A (D type is12.1A) Traverse Stroke (mm) Standard 3000 L (3500) LL - Vertical Stroke (mm) Main Arm 1800 Sub Arm - 1800 Kick Stroke (mm) Main Arm 1570 1380 Sub Arm - 1380 Air consumption liter(Normal) / cycle 51 57 Maximum payload (kg) Less than 35kg*

*The payload varies depending on the take-out robot speed setting ( )Type.L.

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.