NETLINER <<Explanation of the typical model name>>
YAII series
HOME >> Model list >> YAII series

OutlineDimensionsOption List
YAII-1800S/D
Mold clamping force Clamping force 1000 - 1600 ton
No. of servo axes Number of servo axis 3 / 5 axis
Kick frame Kick frame Dual support type
Descend axis arm Vertical frame 2-stage telescopic
type
Linear guide Guide section Yushin linear rail
Control box NC box On robot body
Controller Controller E-touch compact
Click on the above mark displays an explanatory page.

The robot is equipped with a user-friendly E-touch compact controller providing excellent price and performance value.


Sealed cable carriers reduces dust contamination from moving cables and wires.
The steel robot traverse beam provides superior rigidity
to meet customers demands for high accuracy and low vibration when performing value-added operations.

2-stage telescopic vertical arm and a cable carrier that does not protrude above the main arm assembly saves overhead clearance for installations in low ceiling plants.
Manual centralized lubrication system as standard



Power source AC200V (50/60Hz)
Driving method Digital servo motor (3 / 5 axis)
Control method Micro computer control
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

Model YAII-1800S YAII-1800D
Maximum Power Consumption Triple phase AC200V 10.1A (D type is14.8A)
Traverse Stroke
(mm)		 Standard 3500
L 4500
LL -
Vertical Stroke
(mm)		 Main Arm 2100<<2500>>
Sub Arm - 2100<<2500>>
Kick Stroke
(mm)		 Main Arm 1800 1565
Sub Arm - 1565
Air consumption
liter(Normal) / cycle 		135 155
Maximum payload (kg) Less than 50kg*
*The payload varies depending on the take-out robot speed setting
<< >>Vertically extended type

Up
Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.