<<Explanation of the typical model name>>
	YAII series		HOME >> Model list >> YAII series

		YAII-2500S Clamping force more than 1500 ton Number of servo axis 3 axis Kick frame Dual support type Vertical frame 2-stage telescopic type Guide section Yushin linear rail NC box On robot body Controller E-touch compact Click on the above mark displays an explanatory page.

	The robot is equipped with a user-friendly E-touch compact controller providing excellent price and performance value.
		Sealed cable carriers reduces dust contamination from moving cables and wires.
		The steel robot traverse beam provides superior rigidity To meet customers demands for high accuracy and low vibration when performing value-added operations.
		2-stage telescopic vertical arm and a cable carrier that does not protrude above the main arm assembly saves overhead clearance for installations in low ceiling plants.

Power source AC200V (50/60Hz) Driving method Digital servo motor (3 / 5 axis) Control method Micro computer control Air pressure 0.49MPa Maximum air pressure 0.79MPa Wrist flip angle 90 deg.

Model YAII-2500S Maximum Power Consumption Triple phase AC200V 12.4A Traverse Stroke (mm) Standard 3500 L 4500 LL 5000 Vertical Stroke (mm) Main Arm 2500<<3000>> Sub Arm - Kick Stroke (mm) Main Arm 2050 Sub Arm - Air consumption liter(Normal) / cycle 132 Maximum payload (kg) Less than 50kg*[80kg]

*The payload varies depending on the take-out robot speed setting << >> Vertically extended type, [ ] Increased payload specification.

Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.