NETLINER <<Explanation of the typical model name>>
YAII series
HOME >> Model list >>YAII series

OutlineDimensionsOption List
YAII-800S/D, YAII-1300S/D-e
Mold clamping force Clamping force 550 - 1600 ton
No. of servo axes Number of servo axis 3 / 5 axis
Kick frame Kick frame Dual kick frame
Descend axis arm Vertical frame 2-stage telescopic
type
Linear guide Guide section Yushin linear rail
Control box NC box On robot body
Controller Controller E-touch compact
Click on the above mark displays an explanatory page.

This robot, with high rigidity, stably extracts large molded products at high speed.
The "e-type" is the reasonable model applicable to relatively light products
(up to 25 kg) among large molded products.


Sealed cable carriers reduces dust contamination from moving cables and wires.
The steel robot traverse beam provides superior rigidity
To meet customers demands for high accuracy and low vibration when performing value-added operations.
2-stage telescopic vertical arm and a cable carrier that does not protrude above the main arm assembly saves overhead clearance for installations in low ceiling plants.



Power source AC200V (50/60Hz)
Driving method Digital servo motor (3 / 5 axis)
Control method Micro computer control
Air pressure 0.49MPa
Maximum air pressure 0.79MPa
Wrist flip angle 90 deg.

Model YAII-800S YAII-800S YAII-1300S-e YAII-1300D-e
Maximum Power Consumption Triple phase AC200V 9.1A (D type is 12.1A)
Traverse Stroke
(mm)		 Standard 2000 2500
L (2500)

-
LL <3000> <3000>
Vertical Stroke
(mm)		 Main Arm 1550 1800
Sub Arm - 1550 - 1800
Kick Stroke
(mm)		 Main Arm 1140 960 1540 1360
Sub Arm - 960 - 1360
Air consumption
liter(Normal) / cycle 		33 38 36 42
Maximum payload (kg) Less than 25kg*
*The payload varies depending on the take-out robot speed setting.
( )Type.L < >Type LL

Up
Copyright (C) , 2003. Yushin Precision Equipment Co.,Ltd. All rights reserved.