Automatic Stocking System for Plastic Production


	ACS-II B		HOME >> ACS-II B

ACS-II B
Stocker compatible with take-out robot using single-axis servo

Mold clamping force

50 -550ton

Servo driven traverse type robot supported

Air driven traverse type robot supported

Main usage, applicable molded products	General molded products

Stocking type	Flat surface type

Click on the above mark displays an explanatory page.

	Operated with air-driven robots
	This stocker comes up with the "pallet pitch feed mechanism" that enables product palletizing using our air-driven take-out robots (servo used only on the traverse axis).

	Achieving positioning of high-accuracy
	servo motor driving is used to numerically control the motions of the Y-axis (forward/backward) and Z-axis (ascent/descent), which achieves excellent motion repeatability.

	Operating flexibly with various kinds of pallets
	Numerical control of the Z axis (ascent/descent) allows product stocking with Fine pallets of each size, S, M and L.

	Yushin pallets used
	Easy-to-use, light Yushin Fine pallets * are used.
	* Fine pallet, Yushin's original light pallet for stocking molded products. Three types, S, M and L, are available for different sizes of molded products.

Power voltage

AC200V (50/60Hz)

Power consumption

AC200V max 9.25A

Working pressure

0.39-0.49MPa(Gauge)

Maximum allowable pressure

0.75MPa(Gauge)

Air consumption

0.5 liter(Normal)/cycle

Driving method

Air cylinder /AC servo motor / induction motor

Control method

Sequence control

Applicable pallets

Injection-Fine pallets S, M, L

No. of pallets stocked

S :	30 pallets 3 stacks

M :	17 pallets 3 stacks

L :	12 pallets 3 stacks

Pallet changing cycle time

10sec*

*Under our dry cycle measurement condition.